Generally used with bosses with an O.D. of 250" or less

Aesthetically pleasing

Produces a tight stake

Recommended for crystalline materials with sharp melting points such as 33% G.F. Nylon, highly defined melting temperatures, (post cooling a must)

Good for glass filled materials, or materials with abrasive fillers

Good for materials that degrade easily (post cooling)

Dome stakes come in two profiles: High and Low High Profile stake is typically .750" high 3/4" or more Low Profile stake type -.375=3/8" or less

Works well into counter bored holes

Heat Staking - Ultrasonic Welders - Heatstaking

.

For further info visit:
www.sonitek.com